The best OEM supplier for High Quality Gr1 Pure Titanium Bar verifies ASTM B348 compliance, tracks every heat, and adjusts size and finish to your drawing. At Shaanxi CXMET Technology Co., Ltd., we supply high-quality Gr1 pure titanium bars from 2 mm to 300 mm in diameter and in lengths up to 6000 mm with polished, pickled, or sandblasted surfaces. Each shipment can include EN 10204 3.1 or 3.2 certification. We have worked with titanium, nickel, and other non-ferrous metals since 2005. Our team supports engineers and buyers in marine, petroleum, chemical, power, pharmaceutical, electronics, and coating work.
|
|
|
Pure titanium in Grade 1 is the softest grade that you can buy. Metal that is low in oxygen and iron is easier to bend, shape, and draw than metals that are high in oxygen and iron. Ocean water, many acids, and salt can't hurt its surface because titanium dioxide forms a thin, solid film on top of it. There are 4.51 g/cm³ of them, which is about 40% less than stainless steel. You lose strength when you yield at least 170 MPa. Engineers choose this type when low weight, rust resistance, and manufacturability are more important than its strength. A high-quality Gr1 Pure Titanium Bar should be this size.
There are different forms that providers list, and each one is good for a different job. A round bar is most often what it is. Because bright bar has a smooth surface, it can be used to make things with tight standards. Hot-rolled bars are cheaper, but the outside is rougher. With cold-rolled or cold-drawn bars, you have more control over the size. Cutting the bar to the right length saves time, and OEM parts that are made to order are already put together. Our high-quality Gr1 Pure Titanium Bar is round and cold-rolled, so the surface is smooth and the width stays the same. Make sure you know what form you need before you look at prices. Form prices never match up.
The people who buy from me always ask me the same things. To meet ASTM B348 or a similar standard, they want the quality to stay the same from one lot to the next. They also want to be able to trace the heat back to the melt. On top of that, they want easy-to-understand export paperwork and packages that are sent out on time with every sale. They also want choices, like standard sizes, custom lengths, and a lot of them at a low price. If the provider meets those requirements, your team won't have to wait for jobs to be finished or do extra work. We have more than 20 years of experience with non-ferrous metals and 80 professional technicians to back up that mark. We also give straight answers to technical questions. The first step is to find a good partner for a high-quality Gr1 Pure Titanium Bar.
Once you're certain that Grade 1 is right, check the numbers. The round, cold-rolled, high-quality Gr1 Pure Titanium Bar is made in China. At least 99.5% of titanium is pure. You can get them in any length you want. The diameters range from 2 mm to 300 mm, and the lengths go up to 6000 mm. Choose a surface that is smooth, pickled, or scraped. It can be between ISO h9 and H11, or you can pick your own range. When we do our work, we stick to AMS 4921, ASTM B348, and ASTM F67. You can get signed off on by ISO, EN 10204 3.1 and 3.2, or SGS. How you package things for transport depends on what you need.
Grade 1 must have no more than 0.18% oxygen, 0.20% iron, 0.08% carbon, 0.03% nitrogen, and 0.015% hydrogen, according to ASTM B348. The rest of the grade is titanium. There are oxygen, nitrogen, and carbon inside the crystal structure. These make it tougher but less flexible. That's the reason Grade 1 stays soft. Because hydrogen makes hydrides weaker, its limit is important for parts that are joined or made. It also helps keep the rust performance stable and the welds clean when the interstitial content is low. A simple pass note is not enough. You should ask for the heat analysis on the mill test certificate. Next, use the limit to compare each element to itself. Because of this, every High Quality Gr1 Pure Titanium Bar sale is risk-free.
Grade 1 bar must have a tensile strength of at least 240 MPa (35 ksi) and a yield strength of at least 170 MPa (25 ksi). The ASTM B348 says that the least amount of stretching is 24% and the least amount of shrinking is 30%. If you want to cold form or bend the bar, you can stretch it a long way before it breaks. The standard also talks about size, tolerances, tests, and approval for heat. The type, grade, state, and tolerance should all be written on the buy order. People can agree on what a high-quality Gr1 Pure Titanium Bar should do when the order is clear.
Gr1 steel bar is used in places where weight and rust are issues. People who buy it use it to make parts for chemical and petrochemical companies' reactors, heat exchangers, pipes, and storage tanks. Crews in the ocean and on land use it in propeller shafts and systems that clean water of salt. Companies that make electronics, vacuums, and coatings use it to cover things and put electronics inside them. It is used in fuel cells and the cooling systems of power plants. According to ASTM F67, it can be machined into dental implants and medical tools. Before you buy a high-quality Gr1 Pure Titanium Bar for any of these uses, make sure you know its temperature, chemical concentration, flow, galvanic contact, and certification needs.
Grade 2 has a minimum yield strength of 275 MPa and a minimum tensile strength of 345 MPa. It's tougher to shape but can hold more weight. Grade 5 (Ti-6Al-4V) is strong enough to give way and pull apart at 895 MPa. It works well for building parts, but it costs more and is harder to shape and join. Gr1 is for deep drawing, tight bending, or making simple things that won't rust. Choose Gr2 for everyday use with small loads. If you want a lot of stress, choose Grade 5. If you match the strength to the real load, you won't have to pay for features that you won't use. The end of that range for shapeability is met by a high-quality Gr1 Pure Titanium Bar.
Titanium weighs 4.51 g/cm³, while steel weighs between 7.9 and 8 g/cm³. Pitting and crevice attack are harder for popular types like 316L to handle in the ocean and many chloride solutions. Titanium is better at this. When it comes to price, mild places with little salt still have stainless steel ahead. It's possible for a higher buying price to be worth it in the long run if there is less downtime and fewer fixes. An engineer should look at cracks that are hot and tight in chlorides that are very concentrated. It's also important to finish. Cold-rolled high-quality Gr1 Pure Titanium Bar has a smoother surface and tighter limits than hot-rolled stock. It costs less to rough-machine things with hot-rolled bars, though.
Write down your own needs first. These could be the grade, standard, diameter, length, tolerance, surface, quantity, packaging, testing, and so on. You should get heat numbers, mill test certificates, chemical and mechanical reports, and conformity certificates in order to go ahead with this. Take a look at the ISO mark. Next, check out the steps the seller takes to make the item, such as melting, casting, rolling, heat treating, finishing, and making sure the size is correct. In China's "Titanium Valley," our 50,000-square-meter plant is where we make our high-quality Gr1 Pure Titanium Bar. We use cutting-edge melting and forging techniques to do this. Don't forget to ask about export papers, Incoterms, and packaging so that the package doesn't come with any surprises.
If you need a lot of the same sizes quickly, standard stock is a good choice. Custom production can handle narrow or wide widths, cut-to-length needs, or needs that happen over and over again. You can tell us what kind of finish you want for your High Quality Gr1 Pure Titanium Bar, and we can cut it to any length up to 6000 mm. To compare rates, don't use price per kilogram, but full specs. That last number changes based on the materials used, the way they are finished, the certification, the cutting, the packaging, the freight, and the volume. Make plans for return orders and pre-shipment checks before you place a big order.
If you want a supplier to really help you, they should do more than just sell you things. Our staff helps you pick the right grade, plan the sizes, account for cutting, make notes for welding, package, and send your order. The people who work in customer service help people fix problems and answer questions about our goods. The contract, the raw materials, the production process, the finished papers, and the chemistry and mechanics should all be looked over in a good workflow. Each shipment should then be sent out with a way to track it. It's safer to buy things when batches stay the same, lead times are known, and your drawings are kept secret. These habits help long-term OEM plans where the high-quality Gr1 pure titanium bar has to meet every month over time.
There are often problems hidden behind the cheapest quote, such as not having enough certificates, loose standards, uneven surfaces, materials that are refused, or deliveries that are late. People who buy Grade 1 bars also think that all of them are the same. They don't, because each mill has its own rules for making, testing, finishing, and tracking goods. A second mistake that many people make is skipping fake talks. Because pure argon protection stops the brittle alpha case from forming during welding, you should let your source know ahead of time what you want to do with the part. Lastly, before production starts, make sure that the export documents and corrosion conditions are correct. Anything from a High Quality Gr1 Pure Titanium Bar order to a simple paper mess can cause it to be held up. A quick call ahead of time will save you a lot of money.
Use this list to compare any high-quality Gr1 pure titanium bar sellers next to each other before you place your order.
A supplier that passes all three checks lowers your risk on the first order and on every repeat order.
High-quality Gr1 Pure Titanium Bar is best for projects that don't need to be forceful. It's a good choice because it's not too dense, can be shaped, and doesn't rust. It is soft and easy to weld because oxygen, iron, carbon, nitrogen, and hydrogen are limited in a strict way. ASTM B348 says that the minimum tensile strength should be 240 MPa, the minimum yield strength should be 170 MPa, and the minimum elongation should be 24%. Because of these advantages, it is used in electronics, medical parts, marine systems, energy equipment, and chemical processing. They also made it different from stainless steel, Grade 2, and Grade 5. You shouldn't just look at the price per kilogram when choosing a supplier. You should also look at their specifications, certificates, heat traceability, production steps, and total cost. Avoid common mistakes like skipping fabrication planning or using unverified papers, which can protect both the budget and the schedule.
Because it has less oxygen and iron, Gr1 is easier to make. Gr2 is harder than Gr1; its lowest strength is 275 MPa, while Gr1's is only 170 MPa. Choose Gr1 if you want to draw it deeply or bend it. Choose Gr2 for everyday use.
It is important to get an EN 10204 3.1 mill test certificate that shows the heat number, chemical analysis, and mechanical data, and that it meets ASTM B348 standards. We also offer 3.2, ISO, and SGS papers.
Not often. With a minimum output of 170 MPa, it can rust and deform. Most of the time, engineers choose Grade 5 (Ti-6Al-4V) for big loads.
To begin, clean the bar to get rid of the iron and oil. As a shield, use pure argon when you weld because air contamination makes an alpha case, which weakens the weld zone.
Email sales@cxmet.com, send your drawing along with the grade, size, quantity, and instructions on where it should go. We at CXMET will get back to you with a quote that works for you. We've been in the metals business for more than 20 years and offer high-quality Gr1 pure titanium bars. We welcome any questions about OEM, sales, or exporting. Go to https://www.cxmet-tech.com/ to learn more about the product. Furthermore, let us know how you use your computer so we can help you choose the right bar.
1. ASTM B348/B348M, Standard Specification for Titanium and Titanium Alloy Bars and Billets, 2019
2. ASTM F67, Standard Specification for Unalloyed Titanium for Surgical Implant Applications, 2013
3. EN 10204, Metallic Products: Types of Inspection Documents, 2004
4. Donachie, M. J., Titanium: A Technical Guide, 2nd Edition, ASM International, 2000
5. Leyens, C. and Peters, M., Titanium and Titanium Alloys: Fundamentals and Applications, Wiley-VCH, 2003
6. ASM Handbook, Volume 13B: Corrosion: Materials, ASM International, 2005
YOU MAY LIKE