knowledges

Where Is Gr23 Ti 6AL4V Eli Medical Titanium Bar Used?

2026-11-17 17:04:18

Gr23 Ti 6AL4V Eli Medical Titanium Bar is used mainly for orthopedic implants, spinal fixation systems, dental implants and abutments, trauma fixation devices, surgical instruments, and maxillofacial reconstruction hardware. Manufacturers select it because its extra-low interstitial chemistry improves ductility and fracture toughness. Its strength, corrosion resistance, and low elastic modulus also suit long-term contact with body fluids and bone. In this article, I explain where the bar is used, how it differs from Grade 5, and what buyers should confirm before ordering. Shaanxi CXMET Technology Co., Ltd. supplies ASTM F136 bar in diameters from 4 to 100 mm.

blog-1-1

 

blog-1-1

 

What Is the Gr23 Ti 6AL4V Eli Medical Titanium Bar?

An Extra-Low-Interstitial Version of Ti-6Al-4V

Another name for Ti-6Al-4V is Gr23 Ti-6Al-4V ELI Medical Titanium Bar. It is an alpha-beta metal. The base is made of titanium. A small amount of aluminum (5.5–6.5%) keeps the alpha phase stable and strengthens it. The same amount of vanadium (3.5–4.5%) keeps the beta phase stable. Carbon can only be 0.08%, hydrogen can only be 0.012%, oxygen can only be 0.13%, nitrogen can only be 0.05%, and iron can only be 0.25%. Titanium is harder and less flexible because of the atoms that move around inside it. It's not heavy (4.43 g/cm³), so finished parts stay light. There are engineers who already know about Ti-6Al-4V. The areas they work in are science, electronics, and the ocean. When making the ELI grade, the same metal method is used, but there is more control over the chemicals.

Bar Forms and Production Routes

Gr23 Ti 6AL4V Eli Medical Titanium Bar used in medicine can be flat, round, cast, rolled, or cut to size. You can either hot roll or cold roll our Gr23 Ti-6Al-4V ELI Medical Titanium Bar, and then you can polish it or pickle it to finish it. You can also get skins that have been peeled or ground. Some standard sizes are those with lengths of 1000 to 3000 mm and widths of 4 to 100 mm. Round bars can be CNC turned into screws, rods, and stems. People who want to buy flat or shaped pieces should call us to make sure we have what they need. Choosing the shape of the part early on saves time and money because it affects how much material we take away.

ASTM F136 Versus ASTM B348

Mistakes in the specifications lead to a lot of problems when people try to place orders. The standard ASTM F136 talks about surgical implants made of metal Ti-6Al-4V ELI. The standard ASTM B348 talks about bars and billets made of titanium and titanium alloys. These materials are widely used in business. The name F136 should be used in a drawing that needs implant material. Buyers should also check out ISO 5832-3 and AMS 4930 if their quality system lists them. The picture shows how to get certified, keep track of items, and obey the rules of the market. I think you should write the exact standard on the order instead of just the grade name. Our Gr23 Ti-6Al-4V ELI Medical Titanium Bar meets the standards set by ASTM F136, ISO 5832-3, and AMS 4930.

Why Is Grade 23 Titanium Used in Medical and Implant Applications?

Strength, Weight, and Fatigue Performance

It has a minimum tensile strength of 860 MPa, a minimum yield strength of 795 MPa, and a minimum elongation of 10%. It is strong at 4.43 g/cm³, which is about half as dense as cobalt-chrome or stainless steel. Cyclic stress is most important in the hips, knees, and back, where a part may be used millions of times. When the interstitial content is low, the crack resistance is high. A uniform alpha-beta microstructure leads to a high fatigue life. I tell buyers that they shouldn't just trust bar certificates; they should also look at test data on machined parts because the finished shape and condition of the surface can still change how fatigue behaves.

Corrosion Resistance and Biocompatibility

Titanium forms an oxide layer that is very thin and solid. This layer stops body fluids and common cleaning chemicals from spreading. Nickel and chromium are not in the alloy, which is beneficial for people who are sensitive to metals. MRI scans can be done on it because it's not magnetic. The value of elasticity is about 110 to 113 GPa, which is less than stainless steel's 190 to 200 GPa but more than bone. It can't protect against stress as well now because of its composition. Gamma, steam, and plasma can also be used to kill germs without harming Gr23 Ti-6Al-4V ELI Medical Titanium Bar. The oxide surface on titanium helps bone grow around the device, which is why it is used for long-term implants.

Why Material Biocompatibility Alone Is Not Enough?

A bar that bends does not mean that an implant is finished. The final form is made by cutting, cleaning, passivating, sterilizing, packing, and checking the design. Tool contamination can make the surface less resistant to rust, so ASTM F86 says that the surface should be cleaned and passivated after cutting. The company that makes the device is responsible for regulatory approval, which is similar to FDA clearance in the US. It depends on how well the design works. They check the implant after we show them the bar and its papers from the company that made it. People who want to buy something should ask for records specific to their use and test wear in conditions like those of the finished part.

Where Is Gr23 Ti 6AL4V Eli Medical Titanium Bar Used in Medical Manufacturing?

Orthopedic Implants and Spinal Fixation

When it comes to orthopedics, Gr23 Ti-6Al-4V ELI Medical Titanium Bar is used to make bone plates, screws, pins, rods, femur stems, and tibial components. To fix the spine, it is used for pedicle screws, rods, cages, and bolts. It's been years since these parts have been put through cyclic loads. When they are physically fitted, they are also twisted a lot. The alloy can handle these forces, and its lower modulus helps keep stress shielding from happening. When a bone-implant joint that is too stiff bears the weight that it should share, it makes the bone weaker. You can use either small or large stems with this round bar, which is 4 to 100 mm wide. When you turn in the Swiss style, surfaces that have been ground or polished work well.

Dental Implants, Trauma Devices, and Maxillofacial Hardware

Dental manufacturers use the bar to make special abutments and fixtures for implants. Its minimal size makes micro-threading and surface treatments like SLA or plasma spraying possible, which help the implant bond with the bone. The same alloy is used for trauma fixation devices like plates, screws, and pins because broken bones need strong support and the ability to not rust. It is good for maxillofacial repair hardware that the ratio of strength to weight is good because it keeps face implants light. Based on the form, the plan for cutting, and the plan for cleaning that comes after, the shop picks the bar width and surface finish.

Surgical Instruments and CNC-Machined Custom Components

Gr23 Ti 6AL4V Eli Medical Titanium Bar is also used in surgical tools and other medical equipment because it is light, doesn't rust, and can be cleaned many times. This is seen a lot in parts with holes, handles, guides, and fittings. Custom CNC parts are made to fit the needs of a surgeon or patient, so it's important that the measurements are correct and the surface is solid. Machinists use steady feeds, sharp carbide tools, and high-pressure coolant on titanium because it doesn't let heat pass through it easily. When oxide thickness is used, surgical kits don't need to use dyes to show what size screw they have. The finished tool still needs to be checked to ensure it works as intended and meets all requirements.

Grade 23 Titanium Bar Compared With Other Medical Titanium Options

Grade 23 Versus Grade 5

Grade 5 and Grade 23 both have Ti-6Al-4V as their base, but their limits are not the same. Grade 5 can have up to 0.20% oxygen and 0.40% iron to meet ASTM B348. There can be no more than 0.13% oxygen and 0.25% iron in Grade 23. It is harder to break Grade 23 because the balance is tighter. It should be at least 895 MPa for Grade 5 instead of 860 MPa for Gr23 Ti 6AL4V Eli Medical Titanium Bar. In industry and space, Grade 5 is often used for parts, while Grade 23 is for designs that can handle damage and implants that carry weight. Putting them together costs a lot of money, so look at the chemical composition on every mill certificate.

Ti-6Al-4V ELI Versus Commercially Pure Titanium

You can buy pure titanium in shops. Grades 2 and 4 are easy to shape and don't rust, but they're not as strong. It is at least 550 MPa strong for Grade 4, and it's at least 860 MPa strong for Gr23 Ti-6Al-4V ELI Medical Titanium Bar. Pure titanium that is sold in stores is used to make thin plates, mesh, and parts that need to be easy to shape. Grade 23 is used to make screws, rods, and stems that can hold a lot of weight. Pure titanium is harder to cut than Grade 23, but Grade 23 can still be shaped with care. It's not too specific or too general because the power, formability, and application load are all just right.

Forged Versus Rolled Bar and Surface Conditions

Bars can be made with either hot rolling or cold rolling. When making bigger parts, hot rolling is best. When making smaller parts, cold rolling gives you more control over the sizes. For people who need cast stock, we can help them find what they need. Forging evens out the grain flow for almost net forms. How much room for error there is and how well defects can be controlled depend on the condition of the surface. To get rid of scale and the layer of oxygen that hot working leaves behind, pickling is used. When you peel or grind something, you get rid of flaws on the surface and round it out. When you polish something, you make it smooth. In general, people who buy Swiss-style lathes ask for a centerless ground bar with h8 or H9 tolerances. I think you should make sure that these limits can be met before you place an order.

How to Select, Verify, and Buy Grade 23 Titanium Bar?

Define the Application and Write a Complete Specification

Before you go any further, please let us know if the bar is going to be a permanent implant, a temporary device, an instrument, a fixture, or a piece of equipment. Then figure out the amount of danger and how the market works. You should list the grade, standard, bar form, thickness, length, tolerance, heat treatment, surface condition, tests, and flaws that are okay in the drawing. If the bar quality affects the amount of material that can be used and the life of the tool, it should also say what kind of forging or machining will be done. Give yourself room to work so that you can clean up the part after it has been turned. When there is a clear specification, the supplier doesn't have to guess what to do.

How Gr23 Bar Is Made and Verified?

The first step in making a high-quality product is to melt it in a controlled way. It decides how consistent, mixed, and separated the metal is. The rolling is followed by heat treatment, and then it is either peeled, ground, polished, or pickled to finish. Each bar knows how hot it is on its own. Some of the things that usually prove the material are tensile testing, physical inspection, surface study, and microstructure review. Chemical tests for oxygen, nitrogen, hydrogen, and iron are also done. The ultrasonic test looks for holes and hard alpha inclusions in the material that might lead to fatigue cracks. It is possible to check for ultrasonic waves and get certification from a third party. Every package that is shipped comes with batch documents.

Common Purchasing Risks and How to Send an RFQ

Most people get it wrong when the project calls for ASTM F136, and they settle for Grade 5 or a general standard. Some other risks include failing to keep track of the heat, lacking test results, not conducting a thorough check, and setting the price by the kilogram. Costs for You add up costs for scrap, freight, testing, and rejects.The specification provides details about the grade and standard, shape, diameter, length, tolerance, number, finish, testing, location, and delivery goal. First, check the costs to ensure they are reasonable. Then look at how much it costs to deliver, package, ship, and send paperwork. Before you place your first order, make sure you know how to get samples, be told of changes, and keep the product clean.

Why Work With a Qualified Supplier?

In China's "Titanium Valley," in an area of 50,000 square meters, Shaanxi CXMET Technology Co., Ltd. has been in business since 2005. More than 80 experts help with goods made of titanium, nickel, tantalum, niobium, tungsten, molybdenum, and zirconium. Our products are used by people in the vacuum, coating, medical, power metals, marine, oil, and chemical industries. We can cut the medical bar to any length or thickness, machine it, finish it in a way such as pickling, polishing, or grinding, and pack it in a way that is clean enough for surgical use. Our team can help you with detailed questions about picking the right size, making cuts, and planning for inspections. This makes it easier for people to quickly get a supply of Gr23 Ti-6Al-4V ELI Medical Titanium Bar.

Conclusion

Gr23 Ti 6AL4V Eli Medical Titanium Bar is a metal bar that is used to make orthopedic, spinal, dental, trauma, maxillofacial, and surgical tools. It contains less oxygen, nitrogen, carbon, hydrogen, and iron than Grade 5. This makes it easier to shape and less likely to break. The minimum tensile strength is 860 MPa; it is not dense, and the oxide layer is stable, so it can be implanted for a long time. Every order for implant material needs to include ASTM F136. It also said that Grade 23 is not the same as Grade 5 or widely pure titanium. It also showed that the outside finish, the way it is made, and the tests must all match the end part. Material quality does not take the place of device approval. People who compare prices only often don't get as good of results as people who make a list of what they need, look at papers that can be tracked, and look at the total cost.

FAQ

What is the Gr23 Ti-6Al-4V ELI Medical Titanium Bar used for?

My job is to make parts for spinal fixation, dental implants and abutments, trauma devices, and surgery tools out of it.

What separates Grade 5 from Grade 23?

In Grade 23, it's only acceptable to have 0.13% oxygen and 0.25% iron. In Grade 5, it's fine to have 0.20% oxygen and 0.40% iron. The material is less likely to break because the limits are tighter.

How do ASTM F136 and ASTM B348 differ?

An implant made of wrought Ti-6Al-4V ELI is described in ASTM F136. If the drawing needs an implant material, name it F136 instead of ASTM B348 because B348 is a general standard for bars and billets.

Can CXMET supply custom sizes and documents?

Yes. As a general rule, they are between 4 and 100 mm across and 1000 to 3000 mm long. You can also get custom sizes, cut-to-length service, and ultrasonic tests. In the files, there are mill certificates with heat numbers.

Request a Gr23 Ti 6AL4V Eli Medical Titanium Bar Quote From CXMET.

If you are an expert, a customer, or a quality team that wants to work on a project with Gr23 Ti-6Al-4V ELI Medical Titanium Bar, please get in touch with us. We have been selling medical titanium bars for more than 20 years. We have ASTM F136 bars, unique lengths, a service that cuts bars to length, and ultrasonic testing. Send your grade, size, finish, and number to sales@cxmet.com. Visit https://www.cxmet-tech.com/ to learn more.

References

1. ASTM F136, Standard Specification for Wrought Titanium-6A aluminum-4 vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications, 2021

2. ASTM B348/B348M, Standard Specification for Titanium and Titanium Alloy Bars and Billets, 2019

3. ISO 5832-3, Implants for Surgery – Metallic Materials – Part 3: Wrought Titanium 6-Aluminum 4-Vanadium Alloy, 2016

4. Long, M. and Rack, H.J., "Titanium Alloys in Total Joint Replacement – A Materials Science Perspective," Biomaterials, 1998

5. Rack, H.J. and Qazi, J.I., "Titanium Alloys for Biomedical Applications," Materials Science and Engineering C, 2006

6. Boyer, R., Welsch, G., and Collings, E.W. (Eds.), Materials Properties Handbook: Titanium Alloys, ASM International, 1994

YOU MAY LIKE